![background image](http://html.mh-extra.com/html/d-link/dcs-4703e/dcs-4703e_user-manual_77631038.webp)
38
D-Link DCS-4703E User Manual
Section 3: Configuration
Add Event
Create and schedule up to three events with their own settings here. After making any changes,
click the
Save Settings
button to save your changes.
Event name:
Enable this
event:
Priority:
Delay:
Trigger:
Video Motion
Detection:
Periodic:
System Boot:
Network Lost:
Event
Schedule:
Enter a name for the event.
Select this box to activate this event.
Set the priority for this event. The event with higher priority will be executed
first.
Specify the delay time before allowing this event to be triggered again. This
is used for both motion detection events and digital input triggers.
Specify the input type that triggers the event.
Selecting this will trigger the event when motion is detected during live
video monitoring. Make sure you have enabled motion detection and
specified what part of the image to monitor for motion. For more details,
refer to
Selecting this will trigger the event in specified intervals. The trigger
interval unit is in minutes.
Selecting this will trigger an event when the system boots up.
Selecting this will trigger an event when the camera's connection to the
network is lost.
Specify when you want to monitor for this event. Select which days to
monitor for this event, then select
Always
or enter the time interval to
monitor for the specified event.