![background image](http://html.mh-extra.com/html/d-link/dcs-4703e/dcs-4703e_user-manual_77631012.webp)
12
D-Link DCS-4703E User Manual
Section 2: Assembly and Installation
Step 4
Screw the back part of the waterproof connector clockwise until there is a tight seal around
the Ethernet cable.
Step 3
Connect the RJ-45 plug into the Ethernet connector, then screw the waterproof connector to
the Ethernet connector by turning it about a half-turn clockwise.
If you are using PoE to power your camera,
use the included rubber power connector plug
to the power connector.