45
D-Link DCS-2670L User Manual
Section 3: Configuration
Advanced
ICR and IR
Here you can configure the ICR and IR settings. The IR (Infrared) Cut-Removable (ICR) filter can be disengaged for increased sensitivity in low light
environments. After making your changes, click the
Save Settings
button for them to take effect.
Automatic:
Day Mode:
Night Mode:
Schedule Mode:
IR Light Control:
Off:
On:
Sync with ICR:
Schedule:
The Day/Night mode is set automatically. You can use the
Sensitivity
drop-down box to set when the camera will switch to Night mode.
The text box to the right shows which lighting conditions are currently
being detected by the camera for reference. You can refresh this status
by clicking the
Refresh
button.
Day mode enables the IR Cut Filter.
Night mode disables the IR Cut Filter.
Set up the Day/Night mode using a schedule. The camera will enter
Day mode at the starting time and return to Night mode at the ending
time.
The camera can enable or disable the IR (infrared) light according to
your preferences. This setting provides additional controls depending on
your specific application.
The IR light will always be off.
The IR light will always be on.
The IR light will turn on when the ICR filter is disabled (night mode).
The IR light will turn on or off according to the schedule that you specify
below.