D-Link DCS-2136L User Manual Download Page 59

Page: 59 / 68

D-Link DCS-2136L User Manual

Section 4: Configuration

Firmware Upgrade

The camera's current firmware version will be displayed on this screen.

You may visit the D-Link Support Website to check for the latest available

firmware version.

To upgrade the firmware on your DCS-2136L, please download and save

the latest firmware version from the D-Link Support Page to your local

hard drive. Locate the file on your local hard drive by clicking the

Browse

button. Select the file and click the

Upload

button to start upgrading the

firmware.

Current

Firmware

Version:

Current Product

Name:

File Path:

Upload:

Displays the detected firmware version.

Displays the camera model name.

Locate the file (upgraded firmware) on your hard drive

by clicking

Browse

Uploads the new firmware to your camera.

Summary of Contents for DCS-2136L





































































Search results

Summary of Contents for DCS-2136L

Reviews:

Related manuals for DCS-2136L

Brands by name

Popular brands

D-Link DCS-2136L, User Manual

Search results

Summary of Contents for DCS-2136L

Reviews:

Related manuals for DCS-2136L

Brands by name

Popular brands