background image

53

D-Link DCS-1100/1130 User Manual

Appendix D - Warranty

Limited Software Warranty:

D-Link warrants that the software portion of the product (“Software”) will substantially conform to D-Link’s then current functional specifications 

for the Software, as set forth in the applicable documentation, from the date of original retail purchase of the Software for a period of 

ninety (90) days (“Software Warranty Period”), provided that the Software is properly installed on approved hardware and operated as 

contemplated in its documentation. D-Link further warrants that, during the Software Warranty Period, the magnetic media on which D-

Link delivers the Software will be free of physical defects. The customer’s sole and exclusive remedy and the entire liability of D-Link 

and its suppliers under this Limited Warranty will be, at D-Link’s option, to replace the non-conforming Software (or defective media) with 

software that substantially conforms to D-Link’s functional specifications for the Software or to refund the portion of the actual purchase 

price paid that is attributable to the Software. Except as otherwise agreed by DLink in writing, the replacement Software is provided 

only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software. Replacement 

Software will be warranted for the remainder of the original Warranty Period and is subject to the same limitations and exclusions. If a 

material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-

conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that 

the non-conforming Software (and all copies thereof) is first returned to D-Link. The license granted respecting any Software for which a 

refund is given automatically terminates.

Non-Applicability of Warranty:

The Limited Warranty provided hereunder for Hardware and Software portions of D-Link’s products will not be applied to and does not cover 

any refurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, the 

sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being sold 

“As-Is” without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anything 

stated herein to the contrary.

Submitting A Claim:

 The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expired 

and the product is within warranty, the customer shall submit a claim to D-Link as outlined below:

• The customer must submit with the product as part of the claim a written description of the Hardware defect or Software 

nonconformance in sufficient detail to allow DLink to confirm the same, along with proof of purchase of the product (such 

as a copy of the dated purchase invoice for the product) if the product is not registered.

• The customer must obtain a Case ID Number from D-Link Technical Support at 1-877-354-6555, who will attempt to assist 

the customer in resolving any suspected defects with the product. If the product is considered defective, the customer must 

obtain a Return Material Authorization (“RMA”) number by completing the RMA form and entering the assigned Case ID 

Number at https://rma.dlink.com/.

Summary of Contents for DCS-1130 - mydlink-enabled Wireless N Network Camera
































































Reviews: