Specifications are subject to change without notice. D-Link is a registered trademark of D-Link
Corporation and its overseas subsidiaries. All other trademarks belong to their respective owners.
©2013 D-Link Corporation. All rights reserved. E&OE.
DAP-3310
Wireless N Exterior Access Point
Functionality
Operation Mode
• AP
• WDS
• WDS with AP
• Wireless Client
• Repeater
• WISP Repeater
• WISP Client Router
Network Management
• Web Browser Interface
• HTTP – Secure HTTP (HTTPS)
• SNMP v1, v2c and v3
Security
• WPA2-Personal/Enterprise
• WPA-Personal/Enterprise
• WEP 64/128 bit Encryption
• 802.1X
SSID/VLAN
• Support for up to 8 SSIDs/VLANs
Physical
Dimensions
• 48 x 96 x 165 mm (1.88 x 3.77 x 6.49 inches)
Weight
• 350 grams (0.77 lbs)
Power
• Input: 48 V 0.5 A
Temperature
• Operating: -20 to 60 °C (-4 to 140 °F)
• Storage: -20 to 85 °C (-4 to 185 °F)
Humidity
• Operating: 0% to 90% non-condensing
• Storage: 5% to 95% non-condensing
ESD Protection
• 15 kV
Certifications
• CE
• FCC
Order Information
Part Number
Description
DAP-3310
Wireless N Exterior Access Point
1
Limited warranty (12 months) and no D-Link afterservice.
2
Maximum power setting will vary according to individual country regulations.
3
IPX6 standard means the device is protected from low pressure jets of water from all directions - limited ingress permitted. It is recommended to place this device under a roof, shelter or in weather-proof box when in severe
weather environment.
4
Maximum wireless signal rate derived from IEEE Standard 802.11g, and 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range.
5
Provides a secondary Ethernet port with POE output for supported D-Link IP cameras. The supported cameras include D-Link DCS-3716, DCS-6113, and DCS-7110.
6
Maximum power output varies in each country depending on local power regulations.
7
Cannot build WDS with AirPremierN series APs.
8
Grounding wire is not includes in package content and we suggest using 16 -18 AWG grounding wire for normal lightening and electricity current.
9
LED Signal Strength Indication is only supported in Wireless Client, Repeater, WDS and WISP modes.
Updated 2013/03/01
