DAP-300P
Quick Installation Guide
CONNECTING TO PC OR MOBILE DEVICE
Connecting to Mobile Device with
D-Link Assistant Application
1. Connect the power adapter (not included in the delivery package) to the
power connector port on the back panel of the access point, then plug the
power adapter into an electrical outlet or power strip.
2. Make sure that the Wi-Fi connection on your mobile device is on. To
switch it on, go to the mobile device settings.
3. In the list of available wireless networks on your mobile device, select the
wireless network
DAP-300P
.
4. In the opened window, enter the network key (see WPS PIN on the
barcode label on the bottom panel of the device) as the password and
connect to the wireless network of DAP-300P.
5. In the settings of the wireless network
DAP-300P
on your mobile
device, in the
IP Settings
field, select the
Static
value (for Android) or
the
Manual
value (for iOS).
6. Enter the value
192.168.0.51
in the
IP address
field. For iOS
devices, also specify the subnet mask
255.255.255.0
. Confirm the
changed settings.
1 Field names may vary in different versions of operating systems on mobile devices.
5
