DAP-300P
Quick Installation Guide
Configuring Local Area Network
1. Go to the
Connections Setup / LAN
page.
2. If needed, change the IPv4 address of the access point's LAN interface
and the mask of the local subnet. To do this, click the
IPv4
tab and
specify needed values in the
IP address
and
Mask
fields in the
Local
IP Address
section.
3.
If needed, change the static IPv6 address of the access point's LAN
interface. To do this, click the
IPv6
tab and select the
Static
value from
the
Mode of local IPv6 address assignment
drop-down list in the
Local IPv6 Address
section. Then specify the needed value in the
IPv6 address
field.
39
