DAP-300P
Quick Installation Guide
9. In the opened window, in the list of available wireless networks, select the
wireless network
DAP-300P
and click the
Connect
button.
10. In the opened window, enter the network key (see WPS PIN on the
barcode label on the bottom panel of the device) in the
Security key
field and click the
OK
button.
11. Wait for about 20-30 seconds. After the connection is established, the
network icon will be displayed as the signal level scale.
Now you can connect to the web-based interface of DAP-300P for configuring
all needed parameters. To gain access to an external network (to the Internet),
you also need to specify the default gateway and the addresses of DNS servers.
!
If you perform initial configuration of the
access point
via Wi-Fi
connection, note that immediately after changing the wireless default
settings of the
access point
you will need to reconfigure the wireless
connection using the newly specified settings.
17
