D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual Download Page 13

Page: 13 / 90

D-Link DAP-590 User Manual

Section - Configuration

Using the Configuration Menu

To configure the DAP-2590, use a computer that is connected to the DAP-2590 with an Ethernet cable (see the

Network Layout

diagram

First, disable the “Access the Internet using a proxy server” function. To disable this function, go to

Control Panel > Internet Options >

Connections > LAN Settings and uncheck the enable box.

Start your web browser program (Internet Explorer, Mozilla Firefox).

Type the IP address and http port of the DAP-2590 in the address field (

http://192.168.0.50) and press Enter. Make sure that the IP

addresses of the DAP-2590 and your computer are in the same subnet.

After the connection is established, you will see the user identification window as shown.

Note:

If you have changed the default IP address assigned to the DAP-2590, make sure to

enter the correct IP address.

Note:

If you have changed the password, make sure to enter the correct password.

•

Type “

admin” in the User Name field.

•

Leave the Password field blank.

•

Click the

Login button.

Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access Point



























































































Search results

Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access Point

Reviews:

Related manuals for DAP-2590 - AirPremier N Dual Band PoE Access Point

Brands by name

Popular brands

D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point, User Manual

Search results

Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access Point

Reviews:

Related manuals for DAP-2590 - AirPremier N Dual Band PoE Access Point

Brands by name

Popular brands