manualshive.com logo in svg

D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point, User Manual

Share
Download
D-Link DAP-2590 - AirPremier N Dual Band PoE Access Point User Manual Download Page 47

D-Link DAP-590 User Manual

Section  - Configuration

Filters > WLAN Partition

Wireless Band:

Link Integrity:

Ethernet to 

WLAN Access: 

I

nternal Station 

Connection:

Displays the current wireless band rate.

Select 

Enable  or  Disable

. 

If  the  Ethernet  connection 

between the LAN and the AP is disconnected, enabling 
this feature will cause the wireless segment associated 
with the AP to be disassociated from the AP. 

The default is 

Enable. When disabled, all data from the 

Ethernet to associated wireless devices will be blocked. 
Wireless devices can still send data to the Ethernet.

The  default  value  is 

Enable,  which  allows  stations  to 

intercommunicate by connecting to a target AP. When 
disabled, wireless stations cannot exchange data on the 
same Multi-SSID. In �uest mode, wireless stations cannot 
exchange data with any station on your network. 

The DAP-2590 features a wireless partition. Once a user is finished with 
these settings, click the 

Save button to let the changes take effect.

Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access Point



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands