D-Link DAP-590 User Manual
Section - Configuration
DHCP Server > Static Pool Setting
Function Enable/
Disable:
Dynamic Host Configuration Protocol (DHCP) assigns
IP addresses to wireless devices on the network.
This protocol simplifies network management and
allows new wireless devices to receive IP addresses
automatically without the need to manually assign IP
addresses. Select
Enable to allow the DAP-2590 to
function as a DHCP server.
Enter the name of the host computer in this text box.
The DHCP address pool defines the range of IP addresses that can
be assigned to stations on the network. A static pool allows specific
wireless stations to receive a fixed IP without time control.
Once a user is finished, click the
Save button to let the changes take
effect.
Host Name:
Use the Static Pool Settings to assign the same IP address to a device every time you start up. The IP addresses assigned
in the Static Pool list must NOT be in the same IP range as the Dynamic Pool. After you have assigned a static IP address
to a device via its MAC address, click
Save; the device will appear in the Assigned Static Pool at the bottom of the window.
You can edit or delete the device in this list.
Enter the MAC address of the device requesting association here.
Define the subnet mask of the IP address specified in the “IP Assigned From” field.
Assigned MAC
Address:
Subnet Mask:
Assigned IP:
Summary of Contents for DAP-2590 - AirPremier N Dual Band PoE Access Point
Page 1: ......
