86
D-Link DAP-1665 User Manual
Section 5 - Connecting to a Wireless Network
Highlight the wireless network (SSID) you would like to connect to
and click the
Connect
button. The Wi-Fi Configuration Card will list
your device’s specific network.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to
Networking Basics
on page <?> for more information.
The following window appears while your computer tries to connect
to the router.
Enter the same security key or passphrase that is on your DAP-1665
and click
Connect
.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The
key or passphrase must be exactly the same as on the wireless router.
Additionally, you may connect using Wi-Fi Protected Setup (WPS)
and Push Button Configuration (PBC). When the window to the right
is displayed, press the Simple Connect Button on the DAP-1665.
