39
D-Link DAP-1665 User Manual
Section 3 - Configuration
802.11
Mode:
Wireless
Channel:
Enable Auto
Channel
Scan:
Channel
Width:
Visibility
Status:
Select one of the following:
802.11a Only
- Select if you are only using 802.11a wireless clients.
802.11n Only
- Select if you are only using 802.11n wireless clients.
Mixed 802.11n and 802.11a -
Select if you are using a mix of 802.11n and 802.11a wireless clients.
802.11ac Only
- Select if you are only using 802.11ac wireless clients.
Mixed 802.11ac and 802.11n -
Select if you are using a mix of 802.11ac and 802.11n wireless clients.
Mixed 802.11ac, 802.11n and 802.11a
- Select if you are using a mix of 802.11ac, 802.11n, and 802.11a wireless clients.
Indicates the channel setting for the DAP-1665. The channel can be changed to fit the channel setting for an existing wireless
network or to reduce interference in congested areas. If you enable Auto Channel Scan, this option will not be available.
The
Auto Channel Scan
setting can be selected to allow the DAP-1665 to automatically choose the channel with the least amount
of interference.
Select the Channel Width:
Auto 20/40/80
- Select this option if you are using a combination of 802.11ac, 802.11n, and other wireless devices.
Auto 20/40
- Select if you are using both 802.11n and non-802.11n wireless devices.
20 MHz
- Select if you are not using any 802.11n wireless clients.
Select whether you would like the network name (SSID) of your wireless network to be
Visible
or
Invisible
to wireless clients. If
Invisible
, the SSID of the DAP-1665 will not be seen by site survey utilities, so wireless clients will have to manually enter the SSID
of your wireless network in order to connect to it.
Click
Save Settings
at the top of the page to save the current configuration.
