manualshive.com logo in svg

D-Link DAP-1665, User Manual

Share
Download
D-Link DAP-1665 User Manual Download Page 2

ii

D-Link DAP-1665 User Manual

Section 1 - Product Overview

D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any 

person or organization of such revisions or changes.

Manual Revisions

Trademarks

D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other countries. 

All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S. and other countries. App 

Store

SM

 is a service mark of Apple Inc. Chrome™ browser, Google Play™ and Android™ are trademarks of Google Inc. Internet Explorer®, Windows® 

and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2016 by D-Link Corporation, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.

Power Usage

This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no 

packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed.

Network Standby

: 2.56 watts

Switched Off

: 0.07 watts

Preface

Revision

Date

Description

1.00

October 1, 2013

• Initial release

1.01

September 30, 2014

• Add Power Usage

1.10

April 21, 2016

• Updated FCC statement

1.20

October 19, 2016

• B1 firmware release

Summary of Contents for DAP-1665

































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands