46
D-Link DAP-1665 User Manual
Section 3 - Configuration
5 GHz Band
Click to enable the wireless function for the
5 GHz
band. If you
do not want to use wireless, uncheck the box to disable all
wireless functions. You may also set up a specific time range
(schedule). Select a schedule from the drop-down menu or click
Add New
to create a new schedule. By default, the schedule is
set to
Always
.
Specify a network name (SSID) to identify the 5 GHz network.
This is the network name that wireless clients will search for
when connecting to your wireless network. This name should
be different to that of the 2.4 GHz network configured above.
Status:
Wireless
Network Name:
Advanced Settings:
Security
Mode:
802.11 Mode:
Wi-Fi Channel:
Transmission
Power:
Select the type of wireless security you wish to use for the
extended network. Choose from
WPA/WPA2-Personal
/
WPA/
WPA2-Enterprise/None
.
Select one of the following:
802.11a Only
- Select if you are only using 802.11a wireless
clients.
802.11n Only
- Select if you are only using 802.11n wireless
clients.
Mixed 802.11a/n -
Select if you are using a mix of 802.11n and
802.11a wireless clients.
802.11ac Only
- Select if you are only using 802.11ac wireless
clients.
Mixed 802.11n/ac -
Select if you are using a mix of 802.11ac
and 802.11n wireless clients.
Mixed 802.11a/n/ac
- Select if you are using a mix of 802.11ac,
802.11n, and 802.11a wireless clients.
Choose from channels 1-11 for an existing wireless network or
to reduce interference in congested areas.
The
Auto
setting can be selected to allow the DAP-1665 to
automatically choose the channel with the least amount of
interference.
Depending on your wireless reception and coverage area, you
can choose between
Low, Medium,
or
High
power.
