89
D-Link DIR-645 User Manual
Section 3 - Software Configuration
IPv6 Routing
On this page the user can specify custom routes that determine how data is moved around your IPv6 network.
The following parameters will be available for configuration:
Checkbox:
To enable a route, check the box that is on the left
side of the route.
Name:
Enter the IPv6 routing rule name used here.
Metric:
Enter the metric value for this rule here.
Interface:
Use the drop-down menu to specify if the IP packet
must use the WAN or LAN interface to transit out
of the Router.
Destination IPv6:
Enter the IPv6 address of the packets that will take
this route.
Prefix Length:
Enter the IPv6 address prefix length of the packets
that will take this route.
Gateway:
Enter the next hop that will be taken if this route
is used.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
Summary of Contents for Amplifi DIR-645
Page 1: ......
