26
D-Link DIR-645 User Manual
Section 3 - Software Configuration
Address Mode:
Here the user can specify whether this Internet
connection requires the use of a Dynamic or
Static IP address. L2TP usual requires a Dynamic IP
configuration.
L2TP IP Address:
Enter the L2TP IP address used here. This option is
only available if Static IP is selected.
L2TP Subnet
Mask:
Enter the L2TP Subnet Mask used here.
L2TP Gateway IP
Address:
Enter the L2TP Gateway IP address used here.
L2TP Server IP
Address:
Enter the L2TP Server IP address used here. This is
normally the same a the L2TP Gateway IP address.
Username:
Enter the L2TP username used here.
Password:
Enter the L2TP password used here.
Verify Password:
Re-enter the L2TP password used here.
Reconnect
Mode:
Use the radio buttons to specify the reconnect
mode. The user can specify a custom schedule
or specify the
On Demand
, or
Manual
option. To
specify a custom schedule, use the drop-down
menu to select one of the schedules that has been
defined in the Schedules page. To create a new
schedule, click the New Schedule button to open
the Schedules page. Schedules will be discussed
later.
Maximum Idle
Time:
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature,
enable Auto-reconnect.
Primary DNS
Server:
Enter the Primary DNS IP address used here.
Secondary DNS
Server:
Enter the Secondary DNS IP address used here. This field is normally optional. Only one DNS address is required for a functional
Internet connection, but using a second DNS address provides more stability.
Summary of Contents for Amplifi DIR-645
Page 1: ......
