37
D-Link DIR-645 User Manual
Section 3 - Software Configuration
Network Settings
Router IP
Address:
Enter the IP address of the router. The default IP
address is 192.168.0.1. If you change the IP address,
once you click Apply, you will need to enter the
new IP address in your browser to get back into
the configuration utility.
Default Subnet
Mask:
Enter the Subnet Mask. The default subnet mask is
255.255.255.0.
Host Name:
Enter a Host Name to identify this device.
Local Domain
Name:
Enter the local domain name used here. (Optional).
Enable DNS
Relay:
Uncheck the box to transfer the DNS server
information from your ISP to your computers. If
checked, your computers will use the router for a
DNS server.
DHCP Server Settings
DHCP stands for Dynamic Host Control Protocol. This device has a built-in DHCP server. The DHCP Server will automatically assign an IP address
to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP
Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the router. The
DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting
and ending address of the IP address pool.
On this page the user can configure the internal network settings of the router and also able to configure the built-in DHCP server to assign IP
addresses to computers on the network. The IP address that is configured here is the IP address that is used to access the Web-based management
interface. If you change the IP address in this section, you may need to adjust your PC’s network settings to access the network again.
Summary of Contents for Amplifi DIR-645
Page 1: ......
