78
D-Link DIR-645 User Manual
Section 3 - Software Configuration
The following parameters will be available for configuration:
Enable DMZ:
Tick this option to enable the DMZ feature.
DMZ IP Address:
Enter the IP address of the computer on the
LAN that you want to have unrestricted Internet
communication in the DMZ IP address field. To
specify an existing DHCP client, use the Computer
Name drop-down to select the computer that you
want to make a DMZ host. If selecting a computer
that is a DHCP client, be sure to make a static
reservation in the Setup > Network Settings page
so that the IP address of the DMZ machine does
not change.
The following parameters will be available for configuration:
PPTP:
Tick this option to allow PPTP access to the LAN
network.
IPSec (VPN):
Tick this option to allow IPSec (VPN) access to the
LAN network.
RSTP:
Tick this option to allow RSTP access to the LAN
network.
SIP:
Tick this option to allow SIP access to the LAN
network.
Click on the
Save Settings
button to accept the changes made.
Click on the
Don’t Save Settings
button to discard the changes made.
Firewall rules can be used to allow or deny traffic passing through the router. You can specify a single port by utilizing the input box at the top or
a range of ports by utilizing both input boxes. DMZ means “Demilitarized Zone”. DMZ allows computers behind the router firewall to be accessible
to Internet traffic. Typically, your DMZ would contain Web servers, FTP servers and others.
Summary of Contents for Amplifi DIR-645
Page 1: ......
