D-Link AC750 User Manual Download Page 65

Page: 65 / 227

D-Link DIR-818LW User Manual

Section 3 - Configuration

Static IPv6 Address Connection

This mode is used when your ISP provides you with a set IPv6 address that does not change. The IPv6 information is manually entered in your IPv6

configuration settings. You must enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary DNS Server, and Secondary DNS Server.

Your ISP provides you with all this information.

Use Link-Local

Address:

IPv6 Address:

Subnet Prefix

Length:

Default Gateway:

Primary IPv6 DNS

Address:

Secondary IPv6

DNS Address:

LAN IPv6 Address:

The Link-local address is used by nodes and routers when

communicating with neighboring nodes on the same link.

This mode enables IPv6-capable devices to communicate

with each other on the LAN side.

Enter the WAN

IPv6 Address

for the router here.

Enter the WAN

Subnet Prefix Length

value used here.

Enter the WAN

Default Gateway

IPv6 address used here.

Enter the WAN primary DNS Server address used here.

Enter the WAN secondary DNS Server address used here.

These are the settings of the LAN (Local Area Network)

IPv6 interface for the router. The router’s LAN IPv6 Address

configuration is based on the IPv6 Address and Subnet

assigned by your ISP. (A subnet with prefix /64 is supported

in LAN.)

Click on

Next

to continue.

Summary of Contents for AC750




































































































































































































































Search results

Summary of Contents for AC750

Reviews:

Related manuals for AC750

Brands by name

Popular brands

D-Link AC750, User Manual

Search results

Summary of Contents for AC750

Reviews:

Related manuals for AC750

Brands by name

Popular brands