92
D-Link DIR-818LW User Manual
Section 3 - Configuration
IPv6 Firewall
The DIR-818LW’s IPv6 Firewall feature allows you to configure which kind of IPv6 traffic is allowed to pass through the device.
The IPv6 Firewall functions in a similar way to the IP Filters feature.
Check the box to
Enable
the IPv6 firewall simple security.
From the drop-down menu, select
Turn IPv6 Filtering OFF
,
Turn
IPv6 Filtering ON and Allow rules listed
, or
Turn IPv6 Filtering
ON and Deny rules listed
.
Enter a
Name
to identify the IPv6 firewall rule.
The schedule may be set to
Always
, allowing this service to always
be enabled. Or select a schedule from the drop-down menu for
enabling the IPv6 Firewall Rule. You can create your own schedule
in the
Tools
>
Schedules
section.
Use the
Interface
drop-down menu to specify the interface that
connects to the source IPv6 addresses of the firewall rule.
Enter the source IPv6 address range in the adjacent
IP Address
Range
field.
Select the protocol of the firewall port (
All
,
TCP
,
UDP
, or
ICMP
).
Use the
Interface
drop-down menu to specify the interface that
connects to the destination IP addresses of the firewall rule.
Enter the destination IPv6 address range in the adjacent
IP Address
Range
field.
Enter the first port of the range that will be used for the firewall rule
in the first box and enter the last port in the range in the second box.
Click
Save Settings
.
Enable IPv6
Simple Security:
Configure IPv6
Filtering below:
Name:
Schedule:
Source:
IP Address Range:
Protocol:
Dest:
IP Address Range:
Port Range:
