ON
1
2
3
4
5
6
7
8
ON
1
2
3
4
5
CPS-B1
CPS-B1
99.828.32 1.4/07/21
99.828.32 1.4/07/21
8/
24
9/
24
View motherboard
Rauchabzugszentrale
Smoke Vent Controller
D+H Mechatronic - Germany - +49 40 605 65 0
IP
30
VDS-Nr.:
CPS-B1-xx-0101
IN :
OUT :
Temp. -5°C...40°C
Mains
supply
Group
fault
Control
Alarm
Line
fault
Mains
DIP switch
Battery
socket
LED battery
fault
Line
ON-OFF-RESET
Fire recognation element
The control panel has an internal measuring device for monitoring
the internal temperature of the control device. If the internal
temperature is exceeding 72°C (caused by radiant heat of a fire in
immediate vicinity of the mounting place), the entire smoke and heat
vent system will be emergency opened under alarm conditions.
SHEV alarm
Fault
Mains existing
Pictogram explanation
D+H window drive
OK
Control panel O.K.
Fault
Extension
socket
Group
socket
Line
socket
Line extension
socket
(only CPS-B1-5-0101)
LED-Displays
Terminal assignment
No.
Name
Description
Mains supply X1
X1.1
FE
Functional ground
X1.2
N
Neutral conductor
X1.3
L
Phase
Extension socket X2
X2.1
–
Reference potential
X2.2
N+
Output not emergency-supplied pot (max. 250 mA)
X2.3
–
Reference potential
X2.4
+
Output emergency-supplied potential *
X2.5
A
Isolated output alarm - normally open contact
X2.6
C
Isolated output - COM
X2.7
M
Isolated output no alarm / magnet - normally closed contact
X2.8
S
Isolated output fault - normally closed contact
X2.9
C
Isolated output - COM
X2.10
K
Isolated output Control - normally open contact
X2.11
Z
Input, central function, closing of group
X2.12
–
Reference potential
Ventilation button socket X3
X3.1
L
Not closed signal output
X3.2
–
Reference potential
X3.3
Z
Ventilation CLOSE input
X3.4
A
Ventilation OPEN input
Group socket X4
X4.1
E
Monitoring
X4.2
a
Drive output Mot. a
X4.3
b
Drive output Mot. b
Line socket X5
X5.1
FE
Shield connection for fire detector cable
X5.2
R
Input fire detector triggering/monitoring
X5.3
–
Reference potential
X5.4
T
Input smoke vent button triggering/monitoring
X5.5
–
Reference potential
X5.6
K
Output smoke vent button control display
X5.7
A
Output smoke vent button alarm display
X5.8
Z
Input smoke vent button reset line / close group
X5.9
S
Output smoke vent button fault display
Line extension socket X6 (only CPS-B1-5-0101)
X6.1
B–
FAS reference potential input
X6.2
B+
FAS alarm input +24V/+48V
X6.3
RS
Additional reset input with pulse function
X6.4
L
Input/output mutual alarm interlock
X6.5
–
Reference potential
Battery socket X7
X7.1
AKKU–
Negative lead from battery
X7.2
AKKU+
+24V lead from battery
Service
socket*
Ventilation
button socket
max. 30 V / 0,5 A
OK
Signalling relais
* Service socket
For programming various parameters (Ventilation time, stroke
limitation, invert FAS triggering) via the SCS software
and for resetting the service timer.
** JP1
Jumper for voltage interruption of the group.
When the jumper is removed, the group is switched off,
e.g. to allow maintenance work to be carried out safely.
* If additional loads are connected to the emergency-supplied potential of the CPS-B (X2.4, te), their average
quiescent current consumption in the event of a power failure over 72 hours must not be higher than the value
specified below.
The maximum load capacity of the emergency
potential is 250 mA.
Type
2,2 Ah (Battery-Type 2)
3,4 Ah (Battery-Type 8)
CPS-B1-2.5-0101
16 mA
–
CPS-B1-5-0101
–
22 mA
English
English
JP1**
