TITLE
OPERATOR MANUAL
PAGE
PRINTERS
ARTRIX H8
12
VERSION
2017SEP01/1
OUT OF
REVISED BY
MUNOZ, ANTONIO
77
FOR THE USER
d·gen, Inc. - COMPANY PRIVATE (LEVEL 1)
NOT TO BE DISCLOSED TO UNAUTHORIZED PERSONS – PROHIBIDA SU DIVULGACIÓN A PERSONAS NO AUTORIZADAS
DO NOT REPRODUCE WITHOUT AUTHORIZATION – NO REPRODUCIR SIN AUTORIZACIÓN
3
Banana bar.
The purpose of this bar is to homogenize the tension in the fabric. Specially used when printing on
knitted/elastic medias. Also on fabrics with a lower tension in the edges. Possible to regulate the angle
of the bar by turning the wheel. If the tension in the edges are very uneven, it is possible to adjust the
bending angle of the bar manually.
4
Dancing bar.
For applying tension on the fabric. Used only in combination with the motor type feeder when
printing on non-knitted/non-elastic fabrics.
5
FABRIC EPC (Edge Position Control) sensor
Senses the media’s edge to move the feeding unit sideways to align it with the conveyer.
6
Pneumatic clutch.
It is basically a brake system that keeps the fabric always in a proper tension. Possible to regulate the
brake depending on the media’s characteristics. The conveyor drags the media towards the front while
unwinding the media. Increase the brake power if the media is too loose.
7
Pneumatic clutch regulator.
Use this valve to regulate the brake. Increase the brake power if the media is too loose.
8
Ink supply system.
Equipped with 8 PALL® ink filters and 8 ink solenoid valves. Make sure the ink filters are always free
of air. It is connected to the bulk ink system.
9
Printer’s main ON/OFF power button and Ethernet socket.
This main switch turns OFF/ON the printer’s hardware. The Lan port is linked with the RIP station
using a Cat5 (or higher) Ethernet cable.
SIDE VIEW (LEFT)
Summary of Contents for Artrix H8
Page 1: ...OPERATOR MANUAL ...
