3
Straight Cut
Place the work-piece flush with either side
of the guide bar on the working table and
align the blade to the mark on the
work-piece where needs to be cut. Then
press the handle down to complete the cut.
Bevel Cut (1)
There are five slots on the handle base as
shown. One of them is for straight cut and
other two are for bevel cuts. Pull the knob
out of the angle slot on the swing head and
release the knob to the desired angle slot
as shown.
Handle Assembly
Insert the handle to the handle base
and use the provided screw/ washer
/spring washer to secure as shown.
