5
Changing the Nylon Base
Use provided Allan wrench to take off
total 6 screws to remove the working
table , then take off the four screws as
shown to replace the nylon board
when it is necessary.
When the cutter is not in use, you need
to keep the blade in a close position for
the safety.
1.
Turn the cutting head to 45
°
.
2.
Press the handle down to make the
blade in a close position
3.
Lift the device on the top of the
blade holder to hold the blade holder
from coming up
Transportation and Storage
carry or store the cutter as shown.
