3
SET UP
CUTTING AND C
Installation of the Cutter (1)
Install the cross bar to the
cutter base with provided bolts
as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Laser Beam
A laser beam assembly is
mounted on the top of the
blade holder. Push the switch to
turn it on and line up the laser
beam with the cutting line
marked on the flooring plank,
then make a cut.
Suggest to turn it off when not
in use to save battery life.
Installation of the Cutter (2)
1.Install the handle to the
cutter as shown.
2.Open the folded extension
base as shown.
Warning:
Do not put your
fingers against the sharp
edge of the blade at any
time.
