D-Box IV-BD Series, User Manual

Page: 12 / 19

12 of 19
Audio Format Codes Description
ac3_2_0 Dolby Digital 2.0
ac3_5_1 Dolby Digital 5.1
dts_5_1 DTS 5.1
Note: Additional “Audio Formats Codes” may be added as they become available. This is done automatically during the Live Update process.
Most DVD/BD’s also contain many languages. The Motion Controller Software supports the following languages:
Code Description Code Description Code Description
Ara Arabe Bul Bulgare Ces Czech
Deu Allemand Eng Anglais Est Estonien
Fra Français Heb Hebreux Hin Hindi
Ind Indonésien Ita Italien Jpm Japonais
Kor Coréen Lat Letton Msa Malais
Nor Norvégien Pol Polonais Por Portugais
Rus Russe Spa Espanol Tur Turque
Yid Yiddish Zho Chinois Tha Thailandais
Note: Additional languages may be added as they become available. This is done automatically during the Live Update process.
3.2 Preferences sub-menu
The “Preferences” sub-menu gives you direct access to the operating settings that can be adjusted to your liking.
The “Preferences” sub-menu includes the following options:

Start Mode;

Row Levels;

Child Lock;

LCD;

Motion Feedback;

Remember Volume;

Motion Delay.
3.2.1 Start Mode option
This option designates the default playback mode of the Motion Controller when it is turned On. There are two choices at
this point: “Audio” and “F/X”.
3.2.2 Row Levels option
This option can minimize the level of effects independently in each row corresponding to the Motion Seat (or platform). It
allows you to modify the intensity level of motion and vibration effects independently for each row. The row identification
on the first line (Board 0 – Row A) corresponds to the actual
KineLink port designation on the rear of your Motion
Controller to which the Motion Seat (or platform) is connected.
On the second line, the intensity level of the effects is displayed “Vol”. This level indicates the global level of all the effects
on the actuators connected to that row. The level varies between 0 (Off) and 30 (maximum) and is represented by a
horizontal bar. By default, the volume is set at -8db.
On the third and last line the motion “Mot” and the vibration “Vib” levels are displayed. You can only reduce the intensity
of either the Motion or the Vibration level.
3.2.3 Child Lock option
From this option, you can switch the child lock function “On” or “Off”.
The default setting is “Off”. Once the child lock is activated, every time you turn on your Motion Controller, the following
message will be displayed “-
Child Lock Activated! -”