15 of 19
3.3.4 Live Update option
This option allows you to force an immediate update of your motion codes in your Motion Controller. You can also view
your D-BOX Motion Code™ subscription end date in the “Subscription End?” option.
Select “Web-Update” to Update to the latest D-BOX Motion Code™ via your Internet connection.
If you received a CD with the latest D-BOX Motion Code™, insert the CD in your Motion Controller’s BD-ROM drive and
the updates will be done automatically.
Select “Subscription end?” to view your D-BOX Motion Code™ subscription end date.
3.3.5 Auto-Update Setup option
This option allows you to enable or disable the automatic update feature.
In order to perform the automatic updates,
your Motion Controller must be turned “On” and connected to an active Internet connection.
When the Auto-Update is enabled, the updates will take place automatically every day at a random time. If a movie is
playing, the Motion Controller will wait for a pause of 30 minutes without motion to start the update. The default value is
set at “Auto”.
3.3.6 Reset Defaults options
This screen allows you to reset all of the settings presented in the “Preferences” and “Configuration” sub-menus to their
factory default values.
Press the “Accept” key to confirm and restore all of the Motion Controller’s settings to their factory defaults or press the
“Cancel” button to exit this option without resetting all settings to the factory defaults.
3.4 Status sub-menu
The “Status” sub-menu allows you to view certain operating status of the different systems that make the Motion
Controller operational:
From this sub-menu, you have the following options:
“Actuators”;
“Digital In”;
“Error Message”.
3.4.1 Actuators option
This screen allows you to select a specific row (A to D) in order to view its status information.
Each row has 3 options that are typically used for troubleshooting purposes only;
“Com” (Communication);
“Actuator Type”;
“Error”.
In the
“Com”
option, if the message “Com OK” appears at the right of the corresponding Actuator, it means that a Motion
Seat (or platform) is properly connected to the Motion Controller and there is communication with the actuator. However,
if no actuator is connected
,
no message will appear.
“Actuator Type”
option: this screen provides you with the model number for each of the actuators appearing
on the
Motion Seat (or platform) for the selected row.
The
“Error”
option will list any errors the actuators encountered during their operation. The
“Up”
and
“Down”
navigation
keys allow you to navigate among the list of actuators (0,1,2,3).
3.4.2 Digital In option
This screen displays the status of the audio digital link used by the Motion Controller to auto-detect movies and the
synchronization of the motion effects.
The
“Lock”
field will indicate “OK" when the Motion Controller begins motion playback in sequence with the movie
playing and “No Lock” when there is no synchronization between the Motion Codes and the movie playing.
The
“Source”
field indicates which input is currently used to receive the digital audio input signal on your Motion
Controller. There are two possible values for this field: “Toslink” when the optical connection is used; “RCA”, when the
coaxial connection is used.