22
Manual del Usuario
/ DXI series /
User’s Manual
DIRECTLY EDITING AUDIO PARAMETERS (cont'd)
Output Matrix Gains
Note that this feature will only be displayed if the configuration for the amplifier or auxiliary outputs
has been set to operate in “Full Matrix” mode, as opposed to “Free Assign” or a standard routing
configuration (1 x 4 way, 2 x 2 way etc.)
To use “Full Matrix” mode, please see the section about adjusting the configuration on page 27.
Initially, the “send” level from Input A will be selected – press ENTER to jump to the next “send” level
for this output. Range is from -40dB to +15.0dB, with Mute one step below -40.0dB, whereupon the
display will show “Off” as for Input B's send level in the above example.
Out 1 Matrix Gain In A
0.0 Off -40.0 +15.0
