17
Manual del Usuario
/ DXI series /
User’s Manual
DIRECTLY EDITING AUDIO PARAMETERS
Overview
Editing all audio parameters is available from the front panel of your amplifier using a combination of
the select BANK key, reassignable EDIT keys, and the BACK/NEXT/ENTER navigation controls.
First, make sure the correct bank of channels is selected – either inputs A-D, amplifier outputs 1-4 or
auxiliary outputs 5-8 by pressing the BANK key.
Next, press the EDIT key that corresponds to the channel to be adjusted. The EDIT key will
illuminate, and the gain will always be displayed as the first parameter.
To choose another parameter, use BACK and NEXT to scroll through the available choices.
If there are multiple parameters grouped on a single screen (such as parametric EQ frequency, 'Q'
and gain) move between these using the ENTER key.
Finally, use the rotary encoder to adjust the value of the parameter.
You can swap bank at any time by pressing the BANK key, and to quickly access the same
parameter on another channel (within a bank) double press on the required channel's EDIT key. If
the same parameter doesn't exist in a bank (such as no limiters on the input bank), the gain
screen will be shown.
A third press on the same EDIT key will exit editing and return to the current bank's default
screen.
Hint: You can quickly check the same setting of any parameter on a bank of channels by
double pressing each EDIT key in turn – so to check each output's polarity setting, just press
EDIT, press NEXT until Polarity is displayed, then press the next channel's EDIT twice, and so on.
Input Gain
Variable between -40dB and +6dB in 0.1dB steps.
Inp A DeskLeft PEQ:1
Press
ENTER
Press
ENTER
Press
ENTER
102Hz Q=3.0 +10.9dB
Inp A
Gain
Input Gain= 6.0dB
Input Delay
Max delay time is 650.000mS in 10uS steps. Swap to 1mS steps by pressing ENTER.
Units can be changed to read distance instead of time though the system sub-menu – see page 32
for details.
Inp A
Delay
Delay= 500.00mS
