9
Manual del Usuario
/ DXI series /
User’s Manual
9: DIGITAL IN LED: This illuminates if either AES input is switched in (replacing the respective analogue input
channel) and will flash if there is a loss of lock on either input. Note that this does not mean AES is actually
routed to the amplifier's DSP, only that a rear panel socket is set to receive an AES stereo signal.
10: NETWORK AUDIO LED: This will illuminate when an audio network connection is correctly made to the
amplifier. Note that this does not mean that any network audio channels are actually routed to the amplifier's
DSP, only that the connection is available.
11/12: Rotary encoder and navigation keys: MENU is always the way under the bonnet of the amplifier, and
then BACK and NEXT to choose the Sub-Menu and ENTER to select the choice. These controls are also
used when editing DSP audio parameters, accessed via the EDIT keys.
13: Signal meters: Depending on the current bank selected (#14), these will be showing input levels pre-
DSP, output levels for the power amp channels, or output levels of the auxiliary channels.
14: EDIT keys: First press on an EDIT key will show the gain for the selected channel within its respective
BANK. Second press will display the last edited parameter - see pages 17 to 18 for more info on full real-
time editing of input and output parameters.
15: BANK Select key and LEDs: This key will cycle through three banks: inputs A-D, power amp outputs 1-4
or auxiliary outputs 5-8, for both meter displays, mute functions and during editing. Bank select will default
to showing power amp outputs on meters and mutes after 20 seconds of inactivity.
FRONT PANEL (cont'd)
12
11
13
14
15
10
9
