26
Manual del Usuario
/ DXI series /
User’s Manual
ADVANCED EDITING FEATURES (cont'd)
Changing Network Output Source
As your amplifier has a network audio card fitted (Dante) then, as well as being able to route four
channels of audio from the network, it is possible to route four channels of audio back onto the network.
The possible sources for the network outputs are always selected as a group of four, and there are eight
points within your amplifier's DSP than can be chosen.
To choose sources, from the home screen, press MENU, choose the CONFIGURATION Sub-Menu
and press ENTER.
Use the encoder or BACK and NEXT keys to find the Digital Output Source option and press ENTER.
Use the encoder or BACK and NEXT keys to choose between one of the following 5 sources:
Digital Outputs Muted
The network outputs source is disconnected and no audio is transmitted. The Dante
connection is maintained and visible on the network
Amp Outputs pre Mute
Source : audio is sourced just after all amplifier output's processing but pre-mute so the
network copies will not be affected by local (or remote) mutes.
Aux Outputs pre Mute
Source : audio is sourced just after all auxiliary output's processing but pre-mute so the
network copies will not be affected by local (or remote) mutes.
Amp M
Source : audio is sourced just after all amplifier output's processing post-mute so the network
copies will be affected by local (or remote) mutes.
Aux M
Source : audio is sourced just after all auxiliary output's processing post-mute so the network
copies will be affected by local (or remote) mutes.
Press ENTER to confirm the changes and exit to the home screens.
CONFIGURATION Sub -Menu
Digital Output Source
Digital Output Source
Source = Aux Outputs *
