background image

10

ARRAY MOUNTING OF GROUPS OF 4 UNITS ON A 

PL-40S

 

The groups of 3 or 4 units are easy to transport by truck.

 

Lets see in this section how to mount an array of four units.

 

Firstly, mount the 

AX-AE40S3

 onto the top 

box.

 

To mount the 

AX-AE40S3

 take out the rods 

of the top unit.
 

See the result in the right figure.

 

Next, place the side pieces of the 

AX-

AE40S3

 introducing the security pin like in the 

figure below.

 

Check that the security pins are well 

positioned because they will support the weight 
of the rest of the enclosures.

Rods

Manual de Colgado

 / aero series / 

Rigging Manual

RESULT

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

FIX ANGLE

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

0,5º

1,5º

2,5º

STORE

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

0,5º

REAR LINK

1,5º

2,5º

PRESS TRIGGER

TO RELEASE
FRONT DOLLY

ONT LINK

FIX ANGLE

0,5º

1,5º

2,5º

STORE

0,5º

REAR LINK

1,5º

2,5º

0,5º

1,5º

2,5º

STORE

DETAIL

Summary of Contents for Aero Series








































Reviews: