DELTA parameter in EASE Focus 2 software and maximum angles:
As seen before the DELTA parameter makes a difference (in excess or in lack of) between the
desired angle and the obtained angle to hang the system from a single point.
When we fly the system from TWO points, this parameter is very useful because we also
determine the maximum angles with which we can install it.
For example, suppose a set of 12 AERO-40A units:
The system is inclined -6.74 º.
Vertical axis position of center of gravity is aligned with the
pick-up point number 13.
To what maximum angle could we tilt down the system?
Suppose we want to hang the system at -17°.
Let's see what happens in the software:
Observe how Delta: -5.68º
This means that we lack to reach the
desired 5.68º, -17º.
In this case the system could only have a
maximum tilt: 17-5.68 = 11.32°
since no further pick-up points are
available on the AX-AE40S3.
Indeed if we change the angle of the system to -11.32°, we see
that the pick-up point (vertical axis of center of gravity) is
number 17 and
delta
is zero. This indicates that if two lift motors
are used the system could be angled at -11.32°.
38
Manual de Colgado
/ aero series /
Rigging Manual
