SERVICE
BULLETIN
Czech Sport Aircraft a.s.
Na Záhonech 212,
686 04 Kunovice
Czech Republic
No.: SB-SC-055
Date: 2018-08-20
Rev.: -
Page: 7 of 25
Date: -
b)
Set the drilling jig 1-111-0028 on the rib No. 4 (see Fig. 05) and on the right side of the fuel tank so
that the bolt of the jig is inserted into the technological hole made in the nose part of the rib No. 4
and that the area of the jig with drilled holes Ø2.4 mm was pressed against the area of the right side
of the fuel tank (see Figures 09, 10).
Caution:
If a cable or hose passes through the hole in the rib No. 4 and prevents the positioning
of the jig 1-111-0028, release the cable or hose and place them into the slot located between the stops
of the jig.
Drilling jig 1-111-0028
Fig. 09
Fig. 10
Summary of Contents for SportCruiser
Page 25: ......
