SERVICE
BULLETIN
Czech Sport Aircraft a.s.
Na Záhonech 212,
686 04 Kunovice
Czech Republic
No.: SB-SC-055
Date: 2018-08-20
Rev.: -
Page: 4 of 25
Date: -
6)
On the fuel gauge that is installed in the left wing tank and on the left wing cabling, mark appropriate
contacts and plugs. Disconnect the fuel gauge from the electrical wiring of the respective wing, remove
the fuel gauge from the tank and from the wing (see Fig. 03).
Caution:
It is necessary to mark the fuel gauge contacts and the appropriate plug contacts in such a way that after
the reinstallation of the fuel gauge to the tank, it is possible to connect each of the above mentioned
plugs to that contact from which it was disconnected based on this section.
7)
Turn the left wing and put it on the assembly supports so that the upper side of wing is located
on the assembly supports.
8)
From the left wing, remove the cap located on the lower side of leading edge in the area defined
by rib No. 2a and rib No. 4. (see Fig. 04 and 05)
Fig. 03
Fig. 04
Summary of Contents for SportCruiser
Page 25: ......
