SERVICE
BULLETIN
Czech Sport Aircraft a.s.
Na Záhonech 212,
686 04 Kunovice
Czech Republic
No.: SB-SC-055
Date: 2018-08-20
Rev.: -
Page: 11 of 25
Date: -
g)
Drill the holes Ø 2.4 mm made in the connection CE0271N and in the right side of the fuel tank by use
of cleco fasteners to Ø 4.1 mm. Dismantle the connection CE0271N from the fuel tank, deburr all
the holes (see Fig. 18). Install the CE0271N connection back on the right side of the fuel tank
and fasten it to the rib by cleco fasteners. Check the position of the connection pipe through
the hole in the fuel tank intended for the fuel gauge. The position of the connection pipe must
correspond to the position shown in Fig. 16 (there must be sufficient clearance between
the connection pipe, the rib and the fuel tank cover, the connection pipe must not be in touch with
the fuel tank cover or with the rib). Check the position of the connection pipe by using a portable
light and a telescopic mirror.
Fig. 17
Fig. 18
Summary of Contents for SportCruiser
Page 25: ......
