SECTION 3
PS-POH-1-1-13
P
P
S
S
-
-
2
2
8
8
C
C
r
r
u
u
i
i
s
s
e
e
r
r
EMERGENCY PROCEDURES
Date: 2015-11-11
3-15
EASA approved Rev. No.: 1
Alert
Description
SKYNET POWER FAULT
A fault has been detected in the wires that provide
power to SV Network devices.
CAUTION
STANDBY NETWORK
ERROR
SkyView Network has lost its secondary standby
network redundancy.
POSITION SOURCE or GPS
X FAIL
Position source (GPS) failure.
BACKUP BATTERY IN USE
System has switched to SkyView Backup Battery.
OTHER DISPLAY OFFLINE
A SkyView Display has failed or is no longer
communicating via SkyView Network.
NEED COMPASS CAL
Magnetic compass heading is not calibrated.
GPS ASSIST
Airspeed information is not available; GPS is being
used to aid in the computation of attitude
information; Attitude may be degraded.
ADAHRS CAL OLD
Contact Dynon for assistance.
ACTV ADAHRS VIBRATION
The currently-active ADAHRS has detected vibration
that will affect G Meter and attitude indicator
performance. Troubleshoot when able.
BATTERY MISSING / FAULT
A previously connected backup battery is no longer
detected or has failed.
CROSS CHECK ATTITUDE
While in flight, IAS has become invalid (likely due to
icing or obstruction), and all GPS sources have
failed. The attitude indication should be considered
unreliable.
MESSAGE
TIMER EXPIRED
A DOWN timer under TOOLS > TIMER has expired.
BATTERY TEST FAILED
A full backup battery test was performed, and it
failed. See the Installation Guide for further
troubleshooting information.
BATTERY TEST NEEDED
A year or more has passed since the last successful
backup battery test, or the last three SkyView
shutdowns were abnormal.
SOFTWARE MISMATCH
SkyView components are not all running the same
software version.
OEM CONFIG MISMATCH
OEM-customized displays are not in sync with each
other.
TAIL # MISMATCH
Tail numbers differ between SkyView displays –
settings will not properly synchronize.