PSoC® 6 BLE Prototyping Board Guide, Doc. # 002-24993 Rev. **
22
4.
Code Examples
This chapter explains the code example to be adapted to the PSoC 6 Prototyping Board. Most
existing PSoC 6 MCU code examples only require the device to be changed and GPIOs to be
reassigned to match the board.
If you have an existing installation of PSoC Creator, please make sure that you install the EZ-BLE
module device support by following the instructions provided in
EZ-BLE Creator Module Support
page
.
4.1
Using Built-in PSoC Creator Code Examples with the Kit
Follow these steps to open and use the built-in PSoC Creator examples.
1. Launch PSoC Creator from
Start
>
All Programs
>
Cypress
>
PSoC Creator <version>
>
PSoC Creator <version>
.
2. On the Start page, click
Find Code Example...
under
Start
or follow the menu
File
>
Code Example...
as shown in
.
Figure 4-1. PSoC Creator Find Code Example
