PSoC® 6 BLE Prototyping Board Guide, Doc. # 002-24993 Rev. **
20
Kit Operation
4. If there are no errors during build, program the firmware onto the kit by choosing
Debug
>
Program
or press
Ctrl
+
F5
, as shown in
. This programs the target PSoC 6 MCU on
the Prototyping Board.
Figure 3-4. Program Device in PSoC Creator
3.2.2
Debugging using PSoC Creator
For debugging the project using PSoC Creator, follow steps 1–3 from
followed by:
1. Click the
Debug
icon
or press
F5
. Alternatively, you can use the option
Debug
>
Debug
.
2. Once PSoC Creator opens in Debug mode, use the buttons on the toolbar to debug your
application.
For more details on using the debug features, see the
Debugging using PSoC Programmer
section of the
KitProg2 User Guide
.
3.2.3
Programming using PSoC Programmer
PSoC Programmer (3.27.3 or later) can be used to program existing
.hex
files into the PSoC 6 BLE
Prototyping Board. For a detailed explanation on how to program using PSoC Programmer, see the
Programming using PSoC Programmer
section in the
KitProg2 User Guide
.
