PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide, Document Number. 002-22677 Rev. *I
16
Introduction
P11.4
QSPI FLASH/
FRAM DATA2
–
P11.5
QSPI FLASH/
FRAM DATA1
–
P11.6
QSPI FLASH/
FRAM DATA0
–
P11.7
QSPI FLASH/
FRAM CLK
–
P12.0
J3.4 on header compatible
with Arduino, D11
SPI MOSI
ICSP header (J5.4)
and Pmod header
(J14.2)
Remove R77 to disconnect from KitProg3_SPI
lines.
P12.1
J3.5 on header compatible
with Arduino, D12
SPI MISO
ICSP header (J5.1)
and Pmod header
(J14.3)
Remove R85 to disconnect from KitProg3_SPI
lines.
P12.2
J3.6 on header compatible
with Arduino, D13
SPI CLK
ICSP header (J5.3)
and header
compatible with
Pmod (J14.4)
Remove R81 to disconnect from KitProg3_SPI
lines.
P12.4
KitProg3 SPI SELECT
GPIO on
non-Arduino header
(J19.10)
Connected to primary function by default.
Populate R74 to connect to J19 or remove R83
to disconnect KitProg3_SPI_SELECT.
P12.5
PMOD SPI SELECT, J14.1
GPIO on
non-Arduino header
(J19.9)
Connected to primary and secondary functions
by default. Remove R73 to disconnect from J19
or remove R82 to disconnect
PMOD_SPI_SELECT.
P12.6
ECO IN
GPIO on
non-Arduino header
(J19.8)
P12.7
ECO OUT
GPIO on
non-Arduino header
(J19.6)
P13.0
GPIO on header
compatible with Arduino
J3.1, D8
–
P13.1
GPIO on header
compatible with Arduino
J3.2, D9
–
P13.2
USB HOST EN
GPIO on
non-Arduino header
(J21.2)
P13.3
USB_INT_L
GPIO on
non-Arduino header
(J21.4)
Table 1-1. Pioneer board pinout
(continued)
PSoC™ 6
pin
Primary
on-board function
Secondary
on-board function
Connection details
