PSoC™ 6 Wi-Fi Bluetooth® pioneer kit guide, Document Number. 002-22677 Rev. *I
14
Introduction
P6.7
TCLK/SWCLK
–
Remove R183 to disconnect from KitProg3
SWCLK.
P7.0
TRACECLK
GPIO on
non-Arduino header
(J18.6)
Populate R181 to connect to J18 header.
P7.1
CINTA
–
P7.2
CINTB
CSH
Remove C31 (0.47 nF) and populate 10 nF for
CSH.
P7.3
GPIO on non-Arduino
header (J18.5)
CSH
Remove R146 to disconnect from header and
populate C29 (10 nF) for CSH.
P7.4
TRACEDATA[3]
GPIO on
non-Arduino header
(J18.4)
Populate R178 to connect to J18.
P7.5
TRACEDATA[2]
GPIO on
non-Arduino header
(J18.3)
Populate R179 to connect to J18.
P7.6
TRACEDATA[1]
GPIO on
non-Arduino header
(J18.2)
Populate R180 to connect to J18.
P7.7
CMOD
GPIO on
non-Arduino header
(J18.1)
Populate R142 to connect to J18.
P8.0
Proximity
GPIO on
non-Arduino header
(J20.1)
Populate R64 with zero ohm to connect to
header.
P8.1
CAPSENSE™ Button0 Rx
GPIO on
non-Arduino header
(J20.2)
Remove R61 to disconnect CAPSENSE™ pad
and populate R172 to connect to header.
P8.2
CAPSENSE™ Button1 Rx
GPIO on
non-Arduino header
(J20.3)
Remove R60 to disconnect CAPSENSE™ pad
and populate R166 to connect to header.
P8.3
CAPSENSE™ Silder0 Rx
GPIO on
non-Arduino header
(J20.4)
Remove R53 to disconnect CAPSENSE™ pad
and populate R153 to connect to header.
P8.4
CAPSENSE™ Silder1 Rx
GPIO on
non-Arduino header
(J20.5)
Remove R52 to disconnect CAPSENSE™ pad
and populate R152 to connect to header.
P8.5
CAPSENSE™ Silder2 Rx
GPIO on
non-Arduino header
(J20.6)
Remove R47 to disconnect CAPSENSE™ pad
and populate R149 to connect to header.
P8.6
CAPSENSE™ Silder3 Rx
GPIO on
non-Arduino header
(J20.7)
Remove R58 to disconnect CAPSENSE™ pad
and populate R158 to connect to header.
P8.7
CAPSENSE™ Silder4 Rx
GPIO on
non-Arduino header
(J20.8)
Remove R59 to disconnect CAPSENSE™ pad
and populate R160 to connect to header.
P9.0
GPIO on non-Arduino
header (J2.2)
–
Table 1-1. Pioneer board pinout
(continued)
PSoC™ 6
pin
Primary
on-board function
Secondary
on-board function
Connection details
