MB2100-01A-E Single Port Embedded Emulator Debugger SPEED-BOX Operation Guide, Doc. # 002-05542 Rev. *A
18
Connecting the SPEED-BOX
2.3
Connecting the SPEED-BOX to the host computer
The SPEED-BOX is connected to the host computer using the mini USB cable provided with this
product. It is possible to use a mini USB cable other than the provided cable as long the cable is
certified for USB 2.0.
Figure 2-3 shows the connection method.
Figure 2-3. Connection between the SPEED-BOX and host computer
■
SPEED-BOX power supply switch
As a general rule, it is recommended that the SPEED-BOX power switch be turned on after
connecting the USB cable. However, the equipment will not be damaged if the USB cable is
disconnected or connected while the power switch is on.
Host computer
Clump filter
