FM3 Family Math and Motor Control Library Quick Start Guide, Doc. No. 002-04766 Rev. *A
4
1. Demo System
This quick start guide mainly describes how to use the sample project which includes the library functions provided by the
Math and Motor Control Library.
The MMCL is based on the Cypress Cortex-M3 microcontrollers, all of the modules in the MMCL are used in the sample
project that will be described in detail in this guide. You can use this sample project to control the low voltage PMSM or
BLDC.
This chapter introduces one example of inverter motor control project and help you run a motor quickly.
1.1 Demo System Introduction
The connection diagram for the MMCL sample project which is used to control the low voltage inverter motor is shown in
. The sample project can be adaptive to the any type of low voltage PMSM or BLDC motor.
Figure 1-1. Demo Connection
1.2 Hardware Connect
There are 4 lines to be connected to the demo board.
1. Plug the hall signal of motor to inverter board, shown as below.
DC 24V
U,V,W
LVPS
ADPT
Low Voltage Motor
