52
CY3274 Cypress High Voltage Programmable PLC Development Kit Guide, Doc. # 001-53598 Rev. *G
Code Examples
5.2.2
Using the PLT User Module in an Example Project
This section provides a guide to get started with the PLT User Module. This section provides all of
the individual steps for making your first project. This section is intended to provide more
background on how to develop any project. The general steps are:
1. Open PSoC Designer and create a new chip-level Project.
2. Select a CY8CPLC20 device (-28PVXI for 28-pin SSOP or -48LFXI for 48-pin QFN) as shown in
. Both devices have the same number of available hardware blocks and memory, but
the 48-pin device has more I/Os.
Figure 5-1. Select Project Type
3. The CY8CPLC20 device provides the capability to use the PLT User Modules in addition to all the
user modules in a standard PSoC design. In the User Modules window, open the Powerline
Communication folder and double-click the PLT user module to place it as shown in
Figure 5-2. CY8CPLC20 User Modules
