Cypress CM-398H, Operation Manual

Page: 10 / 16

6 7
9. Connection and Installation
CM-398H
or
HDMI TV/Monitor
6
8. OSD
←
INput format / OUTput Resolution
←
Firmware Information
← PC Monitor Information
1. Press the top panel’s button once to switch in between CV/SV. If input
source is disconnected the OSD will show “No Signal”.
2. Press the top panel’s button for 3 second to bring up OSD manual.
3. When the device is under PC mode the OSD will display input format and
output timing, source detection, PC monitor’s EDID and fi rmware version
as to above picture.
4. When the device is under HD mode the OSD will display input format and
output timing, frame rate conversion selection, video system and fi rmware
version as show in below picture.
←
INput format / OUTput Resolution
←
Firmware Information