CY8CKIT-015 PSoC 1 Power Supervision Kit Guide, Doc. # 001-81218 Rev. **
9
Getting Started
3. Ensure that the LCD included with the PSoC DVK is attached and the LCD power jumper (J12) is
in the ON position.
Figure 2-4. CY8CKIT-001 PSoC DVK LCD Power Jumper
4. Set jumpers on the CY8CKIT-035 as follows.
Figure 2-5. J6 to J13 Jumpers Placed (default position)
CAUTION
Do not attach the CY8CKIT-035 EBK to the PSoC DVK until you have programmed the
PSoC 1 with the example project. The GPIOs routed to the EBK connect to the power regulator cir-
cuits. They may be damaged if firmware previously programmed into PSoC drives those pins. When
the PSoC 1 has been programmed, attach the EBK to port A of the PSoC DVK.
Jumper
Name
Setting
J5
12V_Source
12V_DVK (2-3)
Summary of Contents for CY8CKIT-015
Page 10: ...10 CY8CKIT 015 PSoC 1 Power Supervision Kit Guide Doc 001 81218 Rev Getting Started...
Page 24: ...24 CY8CKIT 015 PSoC 1 Power Supervision Kit Guide Doc 001 81218 Rev Example Project...
Page 33: ...CY8CKIT 015 PSoC 1 Power Supervision Kit Guide Doc 001 81218 Rev 33 A 3 5 Top Silkscreen...
Page 36: ...36 CY8CKIT 015 PSoC 1 Power Supervision Kit Guide Doc 001 81218 Rev...
