CYP OR-44VWC, Operation Manual

Page: 9 / 28

9
then press the button for input 2, output "A" will display the video
from input 2 on the right side of the screen. The video image will be
identical for both output A and B.
iii.Dual Group A are outputs A and B combined, Dual group B are
outputs C and D combined. Each group will output the same image
simultaneously.
iv.Press button A or B for 3 seconds to switch the audio for Dual Group
A between output A or B.
v.Press button C or D for 3 seconds to switch the audio for Dual Group
B between output C or D.
TV Wall mode:
i. Press the “Matrix/Dual/Wall” button to switch to the TV Wall mode.
The LED will blink constantly while in this mode.
ii. Press input 1~4 to select a source to output to 4 displays (e.g. a 2 by
2 Video wall). The audio will be on output A only.
6
MATRIX/DUAL/WALL: Press to switch between Matrix mode, Dual
mode and TV Wall mode. When in Matrix mode the LED will be lit
constantly, when in DUAL mode the LED will not be lit and when in TV
Wall mode the LED will blink.
7
LOCK: Press once to lock the keypad and remote control, press and
hold for 3 seconds to release the lock function.
8
SAVE: To save the customized input and output settings.
– Press “Matrix/Dual/Wall” button to select the desired mode.
– Press each output channel A~D and then press corresponding input
channel 1~4 as required.
– Press “SAVE”, the input 1~4 LEDs will light at the same time, then
press one of the input 1,2,3 or 4 buttons to save the settings to the
system memory.
For example: Select Matrix mode, press output A then press
input 4, then press “SAVE”. This will correspond to the remote control
FAV.1~FAV.4 buttons.
9
RECALL: When in Matrix, Dual or Wall mode, press the “RECALL”
button, the input channel 1~4 LEDs will light at the same time. Select
by pressing input channel 1,2,3 or 4 (or FAV1~4 on the remote control)
to recall the customized screen settings.