22
*6 HDCP OUTPUT:
FOLLOW INPUT: If the source has HDCP encryption the output will support
HDCP. If the source does not have HDCP encryption the output will not sup-
port HDCP. If, when in Dual mode, either input (Left or Right) supports HDCP,
the output will be HDCP encrypted.
ALWAYS ON: When in this mode, all connected TV/Monitors need to support
HDCP in order to avoid switching the sources from non-HDCP to HDCP, or
flashing or blank image.
*7 BEZEL CORRECTION:
TV Wall mode only. After adjustment the settings are stored in the last mem-
ory function.
*8 SAVE/RECALL:
To SAVE or RECALL the input/output settings, the system supports last mem-
ory function to save all the setting.
*9 Ethernet RE-LINK:
After the setup, use the RE-LINK option in the OSD menu to re-connect the
system again.
*9 Ethernet TIMEOUT:
Select OFF to cancel the time out function. When no telnet commands are
received within the time limit set in the TIMEOUT setting the telnet system
will be terminated.
*10 IR ADDRESS:
This setting should correspond to the dip switch setting on the IR remote con-
trol (please refer to section 6.4).
*11 INFORMATION:
Shows the settings/information for the Input/Output/Audio/Mode/Firmware
version.
Summary of Contents for OR-44VWC
Page 1: ...OR 44VWC 4x4 Video Wall Control Matrix OPERATION MANUAL ...
Page 2: ......
Page 27: ......
